• KD - 253, Pitampura Near Kohat Enclave Metro Station,
    Delhi-110034
  • Mon-Fri 08:00 AM - 08:00 PM Sun 08:00 AM - 8:00 PM

  • KD - 253, Pitampura Near Kohat Enclave Metro Station,
    Delhi-110034

How to select and install electric cables?

How to select and install electric cables?

It is very important to know the construction, characteristics, and ratings of cables to understand the working and functionality of electric cables before going to purchase them. Before buying an electric cable for your house or any building, you must notify the 4 factors mentioned below:

Conductors:

You must know about the metal used in the wires you are going to purchase. Multi-stranded copper wires are highly preferred due to their durability and low-resistance.

Insulation:

Which material is used should be the concern while purchasing electric wires and cables. Will the wire catch fire with risen temperature, will the wire be exposed to moisture or chemicals should be the factors you should consider before buying electric cables?

Flexibility

A cable should be immediately rejected if it is getting cracks while bending. The insulation material should be highly flexible.

Covering

You must check on the quality of material used in covering a cable while choosing electric cables. The covering of a cable should be composed of good material for better durability.

Cable installation

Cables are used for both indoor and outdoor purpose depending upon the requirement. A trusted and experienced crew should be hired to install cables properly so that no cuts and cracks left behind.

One must wear safety glasses and protective clothing before installing cables and connecting them to the power source. The flow of current in a cable should be tested with a voltage tester before connecting it to an electric appliance.

A plier, voltage tester, wire cutter, and cable strippers should have in your bag before taking a job of connecting or installing cables.

Always check on the work done by the electrician you have hired. Loose wires or wrong connections may result in damage and serious electrical accidents.