Top Best Cables and Wires Maintenance Tips for Industrial Use
Cables and wires for industrial use are the backbones of any manufacturing facility and factory because they run the electricity required for industrial applications. Despite their utmost importance, they are often ignored during installation especially. This is mainly because they are not visible and continue to operate 24/7. But, these conductors need proper care during installation and operation.
Here are cables and wires maintenance tips for industrial use.
To prevent any damage, you need to keep a watch at the time of installation. Avoid any mechanical stress on wires. Make sure wires are laid as straight as possible. Check if they are not twisted or have not any knots of the cable bunch. This allows long-time performance. Also, prevent crushing or impact that can lead to damaging the wire jacket.
Always give priority to safety and the right types of conductors for your particular manufacturing establishment. The environment of your facility should not exceed the ambient temperature for your cables and wires. Set the temperature as per the instructions given by the wire manufacturing company so that your wires and cables can endure the mechanical impact. Also, do not ignore the carrying capacity of your conductors.
If the wires and cables are damaged due to any reason, get them repaired immediately without losing even a single moment. From time to time, keep checking for any visible damage to cables. If any damaged parts, get them removed and replaced with spare cables.
The best thing you can do after successful installation is to schedule a regular examination of your cables and wires. Either train your in-house staff or hire qualified technicians who can help you inspect wires on a regular basis and assist in taking appropriate action in case of any damage.
There is no doubt that you have bought the best quality wires and cables and got them properly installed. Yet, you need to take pepper care of them on a regular basis. Don’t keep anything heavy on them. Check if they are not bent or twisted beyond their recommended bend radius. In addition, make sure no damage has been done at the time of installation.